1. DIY Drawer Pulls

amp_knobs_IMG_0840What you’ll need:

  1. Plastic Object (Toys, Button, Jewelry, etc)
  2. Gorilla Glue
  3. Hanger Bolts, washers, and nuts
  4. Spray Paint ( Colour of your choice )
  5. Drill

Instruction:

  1. Determine which will be the backside of your knob and place a mark where you plan to drill the hole.
  2. With the appropriate size drill bit, slowly drill into the piece. If you are working with a hard plastic, you might want to make a notch in the plastic with a smaller drill bit to help keep things on track once you get going.
  3. After drilling the hole, paint your pieces.
  4. Add a good amount of glue to the end of the bolt and begin to thread it into the piece.
  5. Let the knob dry completely before attaching it to the drawer.
  6. Hold the knob in place with a washer and nut.

Credit: http://www.apartmenttherapy.com/


2. Make your own Shard Light


3. DIY Gold Magnetic Letters

IMG_2304Credit: www.crafthubs.com

What you’ll need:

  1. Rust-Oleum Bright Metallics Spray Paint
  2. Rust-Oleum Plastic Primer
  3. Magnetic Letters

Instruction:

  1. Place a piece of paper or cardboard, start by spraying the back of your letters with the primer.
  2. Cover both sides of the letters with two coats of the primer; then follow with two coats of the gold or until the letters are completely painted. 3. Allow time for drying in between each coat.

Credit: http://inspiredbycharm.com/


4. DIY LEGO Key Organizer

01What you’ll need:

  1. One 8x16 flat plate in gray
  2. Several 1x1 and 1x2 in black for “KEYS” (or whatever you’d like to spell)
  3. 3-5 1x4 Ø4,9 (Technics) for the key chains
  4. 3-5 key rings

Credit: http://www.manmadediy.com/


Credit: http://www.buzzfeed.com/ashleymcgetrick/its-play-time?bffbdiy2&utm_term=.ouky9qRVZ#.rtXz5vQOy


Product Recommended

Rust-Oleum Stop Rust Bright Coat Metallic Spray 11oz (Gold)

View Product